Introduction to ZTACIR Conductor
ZTACIR (Invar 보강재가 포함된 지르코늄-열 합금 도체) 고온 저 새그입니다 (HTLS) 현대적인 전력 전송 요구 사항에 맞게 설계된 도체. 뛰어난 내열성을 제공합니다., lower sag characteristics, and increased current carrying capacity compared to traditional conductors such as ACSR (알루미늄 도체 강철 강화) or AAAC (모든 알루미늄 합금 도체).
As a leading ZTACIR conductor manufacturer, we provide high-performance conductors tailored to the demands of modern power grid infrastructure. Our ZTACIR conductors are engineered to optimize efficiency and reduce transmission losses, making them an ideal choice for upgrading existing lines and deploying new high-capacity power transmission networks.
Advantages of ZTACIR Conductor
- High-Temperature Performance: Operates at temperatures up to 210°C without compromising mechanical integrity.
- Low Sag Characteristics: Incorporates an invar (Fe-Ni alloy) reinforced core to minimize thermal expansion, reducing sagging at high temperatures.
- Enhanced Current Carrying Capacity: Supports higher ampacity compared to conventional conductors, allowing efficient power transmission.
- 부식 저항: Zirconium-enriched aluminum alloy enhances oxidation and corrosion resistance, increasing the conductor’s lifespan.
- Lightweight yet High Strength: A combination of lightweight aluminum alloy and invar core provides excellent strength-to-weight ratio.
- 환경적 이점: Reduced transmission losses contribute to a lower carbon footprint and increased energy efficiency.
Technical Specifications of ZTACIR Conductor
| Property | Specification |
|---|---|
| Conductor Type | HTLS (High-Temperature Low-Sag) |
| Core Material | Invar (Fe-Ni alloy) |
| Outer Layer Material | Zirconium-Aluminum Alloy |
| 작동 온도 | Up to 210°C |
| 정격 강도 | Higher than ACSR and ACSS |
| Thermal Expansion Coefficient | Lower than ACSR |
| Ampacity Increase | 50-80% higher than ACSR |
| 부식 저항 | High |
| Sag Reduction | Significant compared to conventional conductors |
ZTACIR Conductor Model Specifications
| Model | Overall Diameter (mm) | Aluminum Area (mm²) | Core Area (mm²) | Rated Tensile Strength (kN) | DC Resistance at 20°C (아/km) | Current Capacity (ㅏ) |
| ZTACIR-240 | 20.6 | 240 | 42 | 84 | 0.115 | 760 |
| ZTACIR-300 | 23.2 | 300 | 52 | 105 | 0.092 | 890 |
| ZTACIR-400 | 26.7 | 400 | 67 | 130 | 0.072 | 1080 |
| ZTACIR-500 | 30.5 | 500 | 83 | 160 | 0.058 | 1250 |
| ZTACIR-600 | 33.0 | 600 | 98 | 185 | 0.048 | 1400 |
These specifications may vary based on customer requirements and regional power grid standards.
Applications of ZTACIR Conductors
ZTACIR conductors are widely used in modern transmission infrastructure due to their superior efficiency and reliability. Below are some of their key applications:
1. High-Voltage Power Transmission Lines
ZTACIR conductors are ideal for high-voltage (HV) 그리고 초고압 (EHV) 전송선, offering reduced sag and enhanced current carrying capacity.
2. Upgrading Existing Power Lines
Replacing ACSR conductors with ZTACIR conductors allows utilities to increase power transmission capacity without changing tower structures. This is a cost-effective way to modernize power grids without extensive infrastructure modifications.
3. 재생에너지 통합
ZTACIR conductors are essential for integrating solar and wind energy into power grids. Their high ampacity allows them to transmit large amounts of energy over long distances with minimal losses.
4. Urban Power Transmission
In densely populated areas where transmission corridors are limited, ZTACIR conductors help utilities maximize power transmission within existing rights-of-way.
5. Overhead Transmission in Harsh Environments
Due to their corrosion-resistant properties, ZTACIR conductors are well-suited for coastal regions, industrial zones, and areas with extreme weather conditions.
6. Industrial Power Distribution
Heavy industries such as mining, steel production, and chemical plants require high-capacity power transmission, making ZTACIR conductors a reliable solution for these applications.
Comparison: ZTACIR VS ACSR VS ACSS Conductors
| Feature | ZTACIR 드라이버 | ACSR 지휘자 | ACSS 지휘자 |
| 작동 온도 | Up to 210°C | 75-90℃ | 200℃ |
| 새그 성능 | Low | High | Medium |
| Strength-to-Weight Ratio | High | Medium | Medium |
| 부식 저항 | High | Medium | High |
| 전류용량 | High | Medium | High |
| Cost Efficiency | High | Medium | Medium |
Why Choose Our ZTACIR Conductors Manufacturer?
As a professional ZTACIR conductor manufacturer, we offer:
✔ Customized Designs – Tailored specifications to meet regional power grid requirements.
✔ High-Quality Materials – Zirconium-Aluminum alloy and invar core for maximum performance.
✔ Advanced Manufacturing Process – Precision engineering and rigorous quality testing.
✔ Global Supply Chain – Fast and reliable delivery across different regions.
✔ Technical Support – Expert consultation for optimal conductor selection and installation.
Conclusion
ZTACIR conductors represent the future of power transmission, offering high-temperature resistance, 낮은 경우, and superior ampacity. Whether upgrading existing lines or constructing new high-voltage networks, these conductors provide a cost-effective and energy-efficient solution for modern power grids.
As a trusted ZTACIR conductor manufacturer, we are committed to delivering high-performance conductors to meet the demands of the evolving energy sector. Contact us today for more information or to request a quote!